BMX grips can be a little tricky to remove. If you don’t know how to do it, you can damage them or the bar they’re on. In this post, I’ll show you how to remove bmx grips without any trouble.
To remove BMX grips in 2023, follow these simple steps. Start by using a flathead screwdriver or a sharp object to carefully pry off one end of the grip. Once you have a gap, spray a small amount of rubbing alcohol or soapy water into the space to lubricate the grip. Twist and pull the grip in opposite directions to loosen it further.
If it’s still difficult to remove, use compressed air to blow between the grip and the handlebar, creating air pressure and helping to loosen the grip. Repeat the process for the other end, and voila! You’ve successfully removed your BMX grips.
To remove BMX grips, you’ll need a few things:
- A small screwdriver or Allen key
- A rubber mallet
First, use the screwdriver or Allen key to loosen the grip by unscrewing the grip bolt. Once it’s loose, you can pull the grip off with your hands. If the grip is stuck, you can use the rubber mallet to tap it loose.
Once the grip is off, you can inspect the bar for any damage. If there is any, you can use a file or sandpaper to smooth it out.
Also Read: Best BMX Brands
Tips for removing BMX Grips
- If the grip is stuck, use a rubber mallet to tap it loose.
- Inspect the bar for any damage once the grip is off.
- Use a file or sandpaper to smooth out any damage on the bar.
Warning
- Don’t use a screwdriver or Allen key that is too big, or you could damage the bar.
- Be careful not to over-tighten the grip bolt, or you could strip it.
Conclusion
BMX grips can be a little tricky to remove, but with the right tools and a little know-how, you can do it without any trouble. Once you’ve removed the grip, be sure to inspect the bar for any damage.
If there is any, use a file or sandpaper to smooth it out before putting the grip back on. And always be careful not to over-tighten the grip bolt, or you could strip it.
Frequently Asked Questions
How do you know if the BMX grips are too tight?
If the BMX grips are too tight, you may strip the grip bolt when trying to loosen it. To avoid this, always be careful not to over-tighten the grip bolt when installing it.
What do you do with the BMX grips once they're off?
Once the BMX grips are off, you can inspect the bar for any damage. If there is any, you can use a file or sandpaper to smooth it out.
What is the best way to remove BMX grips?
The best way to remove BMX grips is with a small screwdriver or Allen key. With the grip bolt loosened, you can pull the grip off with your hands. If the grip is stuck, you can use a rubber mallet to tap it loose.
How do you prevent damaging the BMX bar when removing the grips?
To prevent damaging the BMX bar when removing the grips, be sure to use a small screwdriver or Allen key. Also, be careful not to over-tighten the grip bolt when installing it.
